B&K Chino Concrete CompanyB&K Chino Concrete Company(909) 479-6302

Garage floor concrete in Chino CA - a solid, level floor you can park on

Cracked, sunken or broken-up garage floor? We'll tell you whether it needs a coating or new concrete, then pour it right.

Modern concrete retaining walls and broad steps frame planted garden beds in front of a house.

Does your garage floor need new concrete or just a coating?

Garage floor concrete in Chino means breaking out a floor that's past fixing and forming, pouring and finishing a new slab in its place, so you end up with a flat, solid floor that carries your car and sheds water.

Most people call after parking over the same crack for years, until a section drops or water starts sitting against a wall. The price moves with the size of the garage, whether the old floor has to be broken out first, how much work the ground underneath needs and whether you want the slab reinforced with rebar, steel bars set inside it, which costs more than plain concrete. The schedule turns on the tear-out, any scan or engineer visit the job needs, what the city requires and the wait before you can park again, and after I look at your garage you get a written estimate with your own numbers.

We're licensed and insured. In California, flat concrete work like a garage floor falls under the state license board's concrete contractor class, which also covers setting screeds, the guides a crew levels the slab to.

  • Breaking out and hauling off the old floor, after the slab is scanned for tensioned steel cables.
  • Forming, pouring and finishing the new slab, sloped slightly toward the garage door so water runs out.
  • Cutting control joints, shallow grooves that give the slab a place to crack in a straight line.

What happens after you call about your garage floor?

Here's how a garage floor goes with us, from the first call to the day you get your garage back. I look at every job myself, so the person who prices it is the person who pours it.

  1. Call or send the form

    Call (909) 479-6302 or use the form and tell me what the floor is doing, and we'll set a time for me to come see it.

  2. I come out and look

    I check the cracks, the low spots and where the water goes, and we talk through what the floor actually needs. If it's new concrete, you get a written estimate that lays out the prep, the work and the price, so there's nothing to guess at.

  3. We go over the plan

    Before we pour, we go over the plan, the prep and anything the city needs, so nobody's surprised on pour day. Any scanning or engineer's visit gets booked ahead of the tear-out.

  4. Pour, finish and clean up

    On pour day my crew and I stay on it until the floor is finished and the garage is cleaned out. Then we tell you when it's ready to walk on and drive on, with satisfaction guaranteed on every job.

How we handle garage floor concrete

Some garage floors just need a coating and some are done, and I'll tell you which one yours is, even when the honest answer is the smaller job. If the cracks look like the slab is still moving, I'll send you to an engineer before we price anything, because a new floor over moving ground just cracks again. When a floor does come out, we have it scanned first, because some slabs are post-tensioned, built with steel cables pulled very tight inside, and cutting into one blind can wreck the slab and make a cable let go violently. Then we break it out, haul it off and pack the subgrade, the dirt the slab sits on, evenly, since ground that's tight in some spots and loose in others settles unevenly and cracks the slab no matter how thick it is or how strong the concrete. After that we form, pour, finish and cut the joints. If the budget's tight, the base is the last place I'd cut, because nobody sees it on day one and everybody sees it a few years later.

A garage floor often ties into other work. If you'd rather not look at plain gray every time the door goes up, decorative concrete can add color or texture to the new slab, and if the garage or driveway sits against a slope, concrete retaining walls keep the dirt where it belongs.

  • Coating the floor you have

    This suits a slab that's stained, worn or has a few hairline cracks but still sits flat and solid. A coating only changes the surface, so it can't fix a floor that's broken up or sinking underneath.

  • Pouring a new slab

    This suits a floor that's past patching, where the trouble is under the surface and not on it. It costs more and takes the garage out of use for a while, but it's the only fix that reaches the ground underneath.

Get a straight answer on your garage floor

We get back to you within one business day to set a time, and I come out for a free, no-obligation estimate on site. Send the garage size, crack photos and whether the slab is post-tensioned.

(909) 479-6302

Questions about replacing a garage floor

These are the questions I hear most from someone standing in a garage looking at a cracked floor. Short answers first, then the part that actually changes what you should do.

How much does a new concrete garage floor cost in Chino?

A concrete slab in Riverside, California usually costs about $7 to $14 per square foot, and that's the going rate for the slab around there, not a quote from us. Where your floor lands depends on the things that move the price, mainly the tear-out and whether it's reinforced. I'll give you a written estimate for your garage after I see it.

How long after pouring a garage floor can I park on it?

The usual guidance is to wait about a week before you drive on it, though you can typically walk on a new slab within 48 hours. Concrete keeps curing, the slow hardening that makes it strong, for about a month, which is why the safe call is to keep the car off for that first week. Line up somewhere else to park before pour day.

Do cracks in my garage floor mean I need a new slab?

Not always. A floor is usually past patching and coating when it's broken into many pieces that move when you drive on them, or has large areas that have sunk or heaved up. Cracks that are wide, still growing or higher on one side than the other, or that come with sticking doors or cracks in the walls, call for a structural engineer's look before any cosmetic fix.

What causes a new concrete garage floor to crack?

Some cracking is just what concrete does, and even the trade's own guide for building floors says a completely crack-free floor isn't realistic with the best design and proper work. What good work controls is where and how badly it cracks, which is why the packed base and the control joints matter. Wire mesh, a welded steel grid, adds little strength to a 3.5-inch slab and mostly holds crack edges together after they form.

How thick should a concrete garage floor be?

One Riverside cost guide says residential floor slabs run four to six inches thick, with garage slabs at the thicker end. Thickness only pays off if the ground under it is packed evenly, which is why I talk about the base before I talk about inches.

Is it okay to pour a garage floor on a hot day?

It can be, but heat changes the job, because fresh concrete sets faster in hot weather, gets harder to finish and is more likely to crack as it shrinks. Pour in the middle of a hot afternoon and you can end up with a weak, dusty top, so we'd rather start early and have the crew ready to finish as the concrete firms up.

Garage floor concrete in Chino and the cities around it

If it's unclear whether your garage floor needs a permit, we check with Chino's Development Services Department, which handles permit requests, and settle who pulls it before we start. We're based in Chino and replace tired garage floors across the cities around it.

(909) 479-6302Get an estimate